FAQs & Troubleshooting
Latest |
CS-8150
42 Results
1. 12/12/2018
It is difficult to pass the thread through the needle bar thread guide(hook).
2. 12/12/2018
When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
3. 12/12/2018
How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
4. 12/12/2018
When thread got tangled.
5. 12/12/2018
Fabric and Thread
6. 05/26/2016
When should I use the extra spool pin?
7. 03/31/2016
"Saving..." message appearing on the LCD. What does it mean?
8. 03/31/2016
"No more stitches can be combined." message appearing on the LCD. What does it mean?
9. 03/31/2016
"Delete the selected pattern." message appearing on the LCD. What does it mean?
10. 03/31/2016
"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
11. 03/31/2016
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
12. 03/31/2016
"Winding bobbin thread." message appearing on the LCD. What does it mean?
13. 03/31/2016
How do I thread the needle?
14. 03/31/2016
How do I wind the bobbin?
15. 03/23/2016
How do I load the spool into the thread cassette?
16. 10/23/2015
Why does the lower thread keep breaking?
17. 10/21/2015
Combination of fabric, thread and needle
18. 05/14/2015
"Change to the single needle mode." appears on the LCD.
19. 04/22/2015
How do I sew a blind hem?
20. 01/24/2014
How do I manually thread the needle?
21. 01/24/2014
Upper Threading (Using the twin needle)
22. 11/20/2012
The thread tension is incorrect.
23. 11/20/2012
Why does the upper thread keep breaking?
24. 11/20/2012
Why does the needle keep breaking?
25. 11/08/2011
Where do I put the oil in my machine?
26. 06/10/2009
How do I sew such as vinyl, leather, quilting layers and velvet?
27. 04/07/2009
"Lower the presser foot lever." appears on the LCD.
28. 04/07/2009
"Lower the buttonhole lever." appears on the LCD.
29. 04/07/2009
"Lift the buttonhole lever." appears on the LCD.
30. 04/07/2009
"The safety device has been activated." appears on the LCD.