FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovbp1400eeus.jpg)
Innov-is BP1400E
57 Results
1.
Tutorial videos on how to use the machine [Video instructions]
2.
How to use the Multi-purpose Screwdriver.
3.
How do I hoop the fabric in the embroidery frame?
4.
How do I adjust the sensitivity of the operation keys?
5.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
6.
How do I adjust thread tension for embroidering?
7.
How do I select or display patterns according to the embroidery frame size?
8.
How do I clean the race?
9.
How do I retrieve the patterns from the machine’s memory?
10.
How do I change the needle ?
11.
Fabric puckers
12.
How do I remove or attach the presser foot ?
13.
How do I save the embroidery patterns in the machine’s memory?
14.
Where do I put the oil in my machine?
15.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
16.
"Preventive maintenance is recommended" appears on the LCD.
17.
Stitches are skipped
18.
How do I enter a line feed in the embroidery pattern?
19.
How do I change the font type in the embroidery pattern?
20.
"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
21.
Embroidery
22.
"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
23.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
24.
How do I edit a single letter in the embroidery pattern?
25.
"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
26.
How do I remove or attach the Embroidery foot ?
27.
How do I set the bobbin ?
28.
How do I wind the bobbin?
29.
"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
30.
"This USB media cannot be used." message appears on the LCD. What does it mean?