FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovbp2100eus.jpg)
Innov-is BP2100
58 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
4.
How do I remove or attach the Embroidery foot ?
5.
Embroidery
6.
"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
7.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
8.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
9.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
10.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
11.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
12.
If the thread breaks during sewing.
13.
"Failed to save file." message appears on the LCD. What does it mean?
14.
"USB media error" message appears on the LCD. What does it mean?
15.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
16.
"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
17.
"Preventive maintenance is recommended" appears on the LCD.
18.
"This USB media cannot be used." message appears on the LCD. What does it mean?
19.
"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
20.
"This file cannot be used." message appears on the LCD. What does it mean?
21.
"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
22.
How do I change the volume of operation sounds or alarm sounds?
23.
How do I change the needle ?
24.
How do I set the bobbin ?
25.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
26.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
27.
How do I clean the race?
28.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
29.
How do I adjust the clock on the display?
30.
"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?