FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_inovve2200eus.jpg)
Innov-is VE2200
68 Results
1.
How to use the Multi-purpose Screwdriver. [ Position “1” ]
2.
How to use the Multi-purpose Screwdriver.
3.
How to use the Multi-purpose Screwdriver. [ Position “3” ]
4.
"This USB media cannot be used." message appears on the LCD. What does it mean?
5.
How to use the Multi-purpose Screwdriver. [ Position “2” ]
6.
How do I clean the race?
7.
"Preventive maintenance is recommended" appears on the LCD.
8.
How do I attach or remove the Embroidery Unit?
9.
When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
10.
How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
11.
Where do I put the oil in my machine?
12.
Embroidery
13.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
14.
When thread got tangled.
15.
How do I calibrate the sensor pen?
16.
When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
17.
How do I specify the embroidering location with the sensor pen? (Specifying the embroidery pattern location by selecting the pattern center with the sensor pen.)
18.
How do I change the needle ?
19.
"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
20.
How do I specify the embroidering location with the sensor pen?(Specifying the embroidery pattern location by selecting the pattern edge with the sensor pen.)
21.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
22.
"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
23.
"Attach the embroidery frame." message appears on the LCD. What does it mean?
24.
"The needle will move. Keep your hands etc. away from the needle area." message appears on the LCD. What does it mean?
25.
"This key does not operate when the needle is down. Raise the needle and press the key again." message appears on the LCD. What does it mean?
26.
"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
27.
"OK to reset the pattern’s border setting, position and/or angle?" message appears on the LCD. What does it mean?
28.
How do I wind the bobbin?
29.
"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
30.
"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?