FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe150veus.jpg)
PE-150V
35 Results
1.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
2.
Place a spool of thread on a spool pin.
3.
Where do I put the oil in my machine?
4.
It is difficult to pass the thread through the needle bar thread guide(hook).
5.
Embroidery
6.
When thread got tangled.
7.
"This pattern is stored in other embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
8.
How do I wind the bobbin?
9.
"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
10.
"No more stitches can be combined." message appearing on the LCD. What does it mean?
11.
How do I correctly install a bobbin?
12.
"Calculating. Please wait." message appearing on the LCD. What does it mean?
13.
"Saving" message appearing on the LCD. What does it mean?
14.
"Calculating cannot be done halfway through." message appearing on the LCD. What does it mean?
15.
"Raise the presser foot and re-thread." message appearing on the LCD. What does it mean and how do I clear it?
16.
Upper Threading
17.
How do I use the needle threader?
18.
How do I create a space between characters?
19.
"Raise the needle to high position." message appearing on the LCD. What does it mean?
20.
"This pattern can not be saved in the memory." message appearing on the LCD. What does it mean?
21.
"Check if thread is entangled. Check if needle is bent." message appearing on the LCD. What does it mean?
22.
"Check if upper or lower thread is cut." message appearing on the LCD. What does it mean?
23.
"Complete pattern entry." message appearing on the LCD. What does it mean?
24.
"Embroidery pattern is exceeding sewing area." message appearing on the LCD. What does it mean?
25.
"No pattern is memorized." message appearing on the LCD. What does it mean?
26.
"Select pattern." message appearing on the LCD. What does it mean?
27.
Why is the outline sewing off the pattern?
28.
Why does the lower thread keep breaking?
29.
"Color cannot be changed halfway." message appearing on the LCD. What does it mean?
30.
"This key does not work when needle is at low position. Raise the needle to high position and touch key again." message appearing on the LCD. What does it mean and how do I clear it?