FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe770eus.jpg)
PE-770
44 Results
1.
How do I retrieve a specific embroidery pattern from the computer to the machine via a USB media?
2.
Where do I put the oil in my machine?
3.
How do I adjust a bobbin case using an embroidery pattern?
4.
How do I attach the embroidery frame?
5.
How do I clean the race?
6.
When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
7.
Embroidery
8.
Place a spool of thread on a spool pin.
9.
How do I correctly install a bobbin?
10.
It is difficult to pass the thread through the needle bar thread guide(hook).
11.
How do I wind the bobbin?
12.
"Cannot sew on this screen." message appearing on the LCD. What does it mean?
13.
"Not enough available memory. Delete another pattern?" message appearing on the LCD. What does it mean?
14.
"Can not recognize the data. The data may be corrupted." message appearing on the LCD. What does it mean?
15.
"The carriage of the embroidery unit will move." message appearing on the LCD. What does it mean?
16.
How do I select patterns from the embroidery cards (sold separately)?
17.
"Select a pattern." message appearing on the LCD. What does it mean?
18.
Upper Threading (Threading the upper thread)
19.
"This pattern cannot be used." message appearing on the LCD. What does it mean?
20.
"The bobbin thread is running out." message appearing on the LCD. What does it mean?
21.
"The pattern is too large for the embroidery frame." message appearing on the LCD. What does it mean?
22.
Upper threading (Point)
23.
When thread got tangled.
24.
"Raise presser foot lever." message appearing on the LCD. What does it mean?
25.
"This embroidery pattern can not be used on this machine." message appearing on the LCD. What does it mean?
26.
"Insert an embroidery card." message appearing on the LCD. What does it mean?
27.
Why is the outline sewing off the pattern?
28.
How do I create a space between characters?
29.
"Deleting..." message appearing on the LCD. What does it mean?
30.
"Total size of the pattern is too large. Rotate the pattern." message appearing on the LCD. What does it mean and how do I clear it?