FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_pe800eus.jpg)
PE800
51 Results
1.
How do I adjust thread tension for embroidering?
2.
Tutorial videos on how to use the machine [Video instructions]
3.
How do I hoop the fabric in the embroidery frame?
4.
How do I adjust the sensitivity of the operation keys?
5.
How do I save the embroidery patterns in the machine’s memory?
6.
How do I change the font type in the embroidery pattern?
7.
Where do I put the oil in my machine?
8.
"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
9.
How do I remove or attach the Embroidery foot ?
10.
How do I wind the bobbin?
11.
How do I edit a single letter in the embroidery pattern?
12.
How do I attach or remove the embroidery frame ?
13.
How do I attach or remove the Embroidery Unit?
14.
How do I change the needle ?
15.
Stitches are skipped
16.
How do I thread the machine (Threading the upper thread)?
17.
How do I retrieve the patterns from the machine’s memory?
18.
Fabric puckers
19.
How do I enter a line feed in the embroidery pattern?
20.
"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
21.
How do I clean the race?
22.
Needle breaks.
23.
How do I set the bobbin ?
24.
"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
25.
"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
26.
"Preventive maintenance is recommended" appears on the LCD.
27.
"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
28.
"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
29.
"USB media error" message appears on the LCD. What does it mean?
30.
"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean and how do I clear it?