FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/hf_sb700teus.jpg)
SB700T
52 Results
1.
Combination of fabric, thread and needle
2.
Fabric and Thread
3.
An "E6" message appears on the panel.
4.
How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
5.
How do I wind the bobbin? (For models equipped with the fast bobbin winding system)
6.
How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
7.
How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
8.
How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
9.
The machine does not make stitches
10.
How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
11.
How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
12.
How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
13.
Place a spool of thread on a spool pin.
14.
Tangled thread on wrong side of fabric
15.
How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
16.
How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
17.
Where do I put the oil in my machine?
18.
F** or "F*" appears on the LCD. What does it mean?
19.
For better results when sewing stretch fabrics
20.
How do I remove or attach the presser foot holder?
21.
How do I clean the machine? (Cleaning the race)
22.
How do I sew an applique?
23.
Upper threading (Point)
24.
Incorrect thread tension
25.
How do I change the needle ?
26.
How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
27.
Why does the needle keep breaking?
28.
The bobbin thread cannot be pulled up.
29.
How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
30.
How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)