FAQs & Troubleshooting
Popular |
TJ-4121TN
110 Results
1.
How to load the Media
2.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
3.
Using the CommTool (for Windows)
4.
How to load the Ribbon
5.
The left or right side of the label is not printed correctly.
6.
How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)
7.
Printing the printer configuration (Self-test)
8.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
9.
How to update firmware to all printers on the same subnet at the same time
10.
The printing position of small label is incorrect.
11.
I cannot install the Windows driver.
12.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.
13.
How to add a new stock from the Seagull driver
14.
I cannot select my printer name from the "Application Matching Printer" drop-down menu in the "Printer Setup" dialog box. (P-touch Editor 5.x for Windows)
15.
How do I reset Wi-Fi® setting?
16.
How to connect the printer to your computer
17.
How to change the speed and density in BarTender
18.
How do I uninstall the printer driver?
19.
The time on the printer is incorrect.
20.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
21.
How to execute the printer configuration (Self-test) to debug
22.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
23.
How to change the printer code page
24.
How to update the firmware
25.
How to get an alert log file using the BPM (Brother Printer Management Tool) (for Windows)
26.
How to install the Windows driver via Wi-Fi®/ wired network
27.
When I open a CSV file in P-touch Editor, some characters are garbled. (P-touch Editor 5.x)
28.
The label is skipped when printing.
29.
The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".
30.
How to set the Gap/Black Mark Sensor as Media Sensor and calibrate the Gap/Black Mark Sensor by directly operating the printer