1.

How to install the Mac driver via USB/ Wi-Fi®/ wired network

2.

The printing position of small label is incorrect.

3.

How to load the Media

4.

Using the CommTool (for Windows)

5.

The left or right side of the label is not printed correctly.

6.

How to connect the printer to your computer

7.

The label is skipped when printing.

8.

How to install the Windows driver via Wi-Fi®/ wired network

9.

How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)

10.

How do I connect the printer via Bluetooth®/Wi-Fi®/wired network?

11.

How to set the Direct Thermal or Thermal Transfer Print Methods

12.

How to add a new stock from the Seagull driver

13.

How to download the BMP/PCX file into your printer by the BPM (Brother Printer Management Tool) (for Windows)

14.

My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)

15.

How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)

16.

How to adjust the cut position (For Windows)

17.

Enable or disable Bluetooth Low Energy (BLE)

18.

I cannot install the Windows driver.

19.

How to load the Ribbon

20.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows “Paper Jam”.

21.

The printed label is wrinkled.

22.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Ribbon" or "Ribbon Encoder Err./Ribbon End Err".

23.

How to update the firmware

24.

How to transfer the print programs or templates using FBPL commands

25.

The LED is flashing in red and the printer status from the BPM (Brother Printer Management Tool) shows "Out of Paper".

26.

BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.

27.

How to calibrate the Gap/Black Mark Sensor by directly operating the printer

28.

How to get Bluetooth MAC Address with the CommTool (for Windows)

29.

The LED is lit in red and the printer status from the BPM (Brother Printer Management Tool) shows "Head Open".

30.

How to skip the AUTO.BAS program only one time by directly operating the printer