FAQs & Troubleshooting
![]() |
Popular |
![](/g/b/img/product/rj3055wbeus.jpg)
RJ-3055WB
59 Results
1.
How to install the Mac driver via USB/ Wi-Fi®/ wired network
2.
The left or right side of the label is not printed correctly.
3.
Using the CommTool (for Windows)
4.
I don't know the Product Key Code for BarTender UltraLite Edition 2021 (BarTender Designer for Brother).
5.
I cannot install the Windows driver.
6.
How to transfer the print programs or templates using FBPL commands
7.
How to connect the printer to your computer (for Windows)
8.
How to add a new stock from the Seagull driver
9.
Update the Bluetooth®/Wi-Fi® module's firmware to use Bluetooth Low Energy (BLE)
10.
I cannot connect my machine to the wireless network.
11.
I can no longer print from my computer via Bluetooth®, even though I was able to print previously.
12.
How to calibrate the Gap/Black Mark Sensor by directly operating the printer
13.
How to adjust the print position with the BPM (Brother Printer Management Tool) (for Windows)
14.
Enable or disable Bluetooth Low Energy (BLE)
15.
How to set Bluetooth Local Name or PIN code using the BPM (Brother Printer Management Tool) (for Windows)
16.
How to install the Windows driver via Wi-Fi®/ wired network
17.
How to update the firmware
18.
Printing is not possible.
19.
How to install the Roll Spacer Set (Optional)
20.
How to execute the printer configuration (Self-test) to debug
21.
How do I reset Wi-Fi® setting?
22.
My printed documents are incomplete or a blue screen appears when printing after a Windows 10 update (March 2021)
23.
BarTender UltraLite Edition 2021 (BarTender Designer for Brother) displays the error #1401 during printing.
24.
Where can I find the printer's network settings, such as IP address?
25.
How to install the Windows driver via Bluetooth®
26.
How to change the control prefix code with the BPM (Brother Printer Management Tool) (for Windows)
27.
Printed barcodes cannot be read.
28.
How to install the Roll Holder (PA-RH-002) (Optional)
29.
The print quality is poor.
30.
The time on the printer is incorrect.