Search

Site Map

Home > Install Software > Connect the Printer to a Computer > Connect the Printer to a Computer Using RS-232C

Connect the Printer to a Computer Using RS-232C

Connection using RS-232C requires the use of a dedicated conversion cable (PA-SCA-002).

  1. Start the Printer Setting Tool.

    Click Start>Brother>Printer Setting Tool.

  2. Click P-touch Template Settings>Communication Settings.
  3. Set parameters in the Communication Settings window as follows:
    Baud rate
    From 4800 bps to 115200 bps
    Bit Length
    7 bits or 8 bits
    Parity
    None, Odd, or Even
    Busy Control
    DTR or XON/XOFF
    image
    Other settings, such as the baud rate, must be changed in order to use a RS-232C connection. The settings for this printer's serial port are shown in the table above.
  4. Click the Set button to save the parameters.
Related Information
Did you find the information you needed?

find moreaccept