Home > Machine Settings > Change Machine Settings from the Control Panel > Save Your Favourite Settings as a Shortcut > Assign a Shortcut to an IC Card > Assign a Shortcut to an IC Card with IC Card Reader
Assign a Shortcut to an IC Card with IC Card Reader
You can assign one Shortcut to your IC card. When you touch your IC card to the IC card reader connected to your machine, your personal Shortcut automatically appears on the touchscreen.
- You cannot use the same IC card for different Shortcuts.
- To use the IC card for another Shortcut, unregister the card first, and then register it with the new Shortcut.
- You cannot assign the Scan to USB function as a shortcut to your IC card.
Before you assign a shortcut to an IC card, register an external IC card reader. Use Web Based Management to register the card reader. Your machine supports external IC card readers that use HID-class drivers.
- Start your web browser.
- Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
https://192.168.1.2
- If required, type the password in the Login field, and then click Login.The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
- In the left navigation bar, click .If the left navigation bar is not visible, start navigating from
. - Enter the necessary information, and then click Submit.
- Connect the card reader to your machine.
- If the Home screen appears, press the tab that contains the Shortcut you want to assign to your IC card.
- Press and hold the Shortcut until the options appear.
- Press
or 
to display the [Register Card/NFC] option, and then press it. - Touch the IC card to the IC card reader connected to your machine.
- Press [Register].The Shortcut is assigned to the IC card.
Did you find the information you needed?