Type a name for this server profile (up to 14 alphanumeric characters). The machine displays this name on the LCD.

Type the Host Address (for example: ftp.example.com; up to 64 characters) or the IP address (for example: 192.23.56.189).

Type a user name (up to 32 characters) that has permission to write data to the FTP server.

Type the password (up to 33 characters) associated with the user name you entered in the Username field. Type the password again in the Retype password field.

Set the SSL/TLS option to scan securely using SSL/TLS communication. Change the CA Certificate setting, if needed.

Type the path (up to 255 characters) to the folder on the FTP server where you want to send your scanned data. Do not type a slash mark at the beginning of the path (for example: brother/abc).

Select a file name from the preset names provided, or from user-defined names. You can set the user-defined names and file name style in the Scan File Name menu in the navigation menu.

Select a quality setting. When Auto is selected, you can adjust the detection level of color from the Auto Color detect adjust drop-down list.

Select the file type you want to use for the scanned document.

Select your document size from the list. This is necessary to make sure the scanned file is the correct size.

When On is selected, the four edges of the scanned plastic card image are filled with white space.

Edge Fill for Plastic Card is available only for scanning from the Card Slot.

Adjust your document's margins.

Select your file size.

Select the On option to remove blank pages of the document from the scanning results.

Select the sensitivity level for detecting blank pages in the scanned data. The higher the sensitivity, the easier it is for the machine to detect blank pages.

Split a scanned image.

When multiple documents have been scanned, you can split up and save documents separately by using this function. You can also set the number of pages to split a document by.

Select the compression TIFF file type for a color/gray document.

Select the compression TIFF file type for a black and white document.

Select On to scan both sides of the document.

Select the brightness level.

Select the contrast level.

Scan more pages than the maximum capacity of the ADF and save them as one data file.

Set the Passive Mode option to off or on depending on your FTP server and network firewall configuration. The default setting is off. In most cases this setting does not need to be changed.