Home > Introduction to Your Brother Machine > Touchscreen LCD Overview
Touchscreen LCD Overview
Home Screens
There are three Home screens that you can access by pressing or
.
The following screens display the machine’s status when the machine is idle:
Home Screen 1
![]() | Home Screen 1 provides access to Scan to PC, Scan to Workflow, and Scan to Network operations. |
Home Screen 2
![]() | Home Screen 2 provides access to Scan to FTP/SFTP, Scan to Email Server, and Scan to USB operations. |
Home Screen 3
![]() | Home Screen 3 provides access to WS Scan operation. |
- [to PC]
Press to access the Scan to PC function.
- [to Workflow]
Press to access the Scan to Workflow function.
Settings must be configured in iPrint&Scan in advance. - [to Network]
Press to access the Scan to Network function.
(Wireless Status)
Each icon in the following table shows the wireless network status:
- Your machine is not connected to the wireless access point/router.
Press this icon to configure wireless settings. For more detailed information, see the Quick Setup Guide.
- The wireless setting is disabled.
The wireless network is connected.
A three-level indicator in each of the Home screens displays the current wireless signal strength.
The wireless access point/router cannot be detected.
You can configure wireless settings by pressing the Wireless Status button.
([Settings])
Press to access the Settings menu.
([Shortcuts])
Press [Shortcuts] and then
, to create Shortcuts for frequently used operations such as Scan to PC, Scan to Email Server, Scan to USB, or other functions.
You can quickly scan using the options set as Shortcuts.
To display the other Shortcuts screens, press
or
.
Five Shortcut screens are available with up to four Shortcuts on each screen. A total of 20 Shortcuts can be created.
- [to FTP/SFTP]
Press to access the Scan to FTP/SFTP function.
- [to Email Server]
Press to access the Scan to Email Server function.
- [to USB]
Press to access the Scan to USB function.
- [WS Scan]
Press to access the WS Scan function.
![image](../images/topic1_icon5.png)
Auto Start Scan
The Auto Start Scan feature allows you to start scanning automatically as soon a document is placed in the ADF.
To use Auto Start Scan, you must first create an Auto Start Scan Shortcut and then enable the Auto Start Scan setting in General Setup:
- Press [Shortcuts].
- Press
once to display [Auto Start Scan].
- Press
to add the Auto Start Scan Shortcut.
- Select the Shortcut function (for example, Scan to PC).
- Press [Save as Shortcut]. When the LCD displays [These settings will be saved as a shortcut.], press [OK].
- Enter the Shortcut Name and press [OK]. When the LCD displays [Make this a One Touch Shortcut?], press [OK].
- Press
([Settings]) to access the Settings menu. Press and select [On].
- NOTE
- Only one Auto Start Scan profile can be saved at a time.
Settings Menu
Press ([Settings]) to check and access all the machine’s settings.
- [General Setup]
Press to access the General Settings menu.
- [Shortcut Settings]
Press to set Shortcuts. This option is unavailable and cannot be selected if you have not added Shortcuts.
- [Network]
Press to access Network settings.
- [Machine Info.]
Press to check the machine’s information.
- [Initial Setup]
Press to access the [Date & Time], [Reset], and [Local Language] menus.