Home > Machine Settings > Change Machine Settings from the Control Panel > Change the General Settings from the Control Panel
Change the General Settings from the Control Panel
Purpose | Operation | Description |
---|
Adjust the LCD Backlight Brightness | ![]() | Adjust the brightness of the LCD backlight. |
Change How Long the LCD Backlight Stays On | ![]() | Set how long the LCD backlight stays on. |
Display scan results | ![]() | Set the LCD to display how many pages are scanned and how many are skipped. |
Set Sleep Mode Countdown | ![]() | Set how long the machine must be idle before it goes into Sleep Mode (5-90 minutes). The Sleep Mode setting can reduce power consumption. When the machine is in Sleep Mode, it acts as though it is turned off. The timer will restart if any operation is carried out on the machine. ![]() The machine will not enter Sleep Mode in the following situations:
|
Set the Machine to Power Off Automatically | ![]() | Select how long the machine must wait before it automatically turns itself off after entering Sleep Mode. The Auto Power Off feature can save power consumption. When this feature is set to Off, you must power off the machine manually. To turn on the machine after the Auto Power Off feature has turned it Off, press The timer will restart if you press any buttons or touchscreen. ![]() Auto Power Off will be activated when all of these conditions are met:
|
Turn the Auto Start Scan Mode On | ![]() | Scanning starts automatically using the settings saved as the auto scan shortcut (Shortcut 57) when you place a document in the ADF. It is not necessary to press the Scan Button. |
Turn the wireless network connection On |
| Turn the wireless network connection On or Off. |
Set the Date and Time | ![]() | Set the date and time. If you set Auto Daylight to On, the time will be adjusted forward one hour in the spring and adjusted backward one hour in the fall. |
Change for Daylight Saving Time Automatically | ![]() | Set the machine to change automatically for Daylight Saving Time. It will reset itself forward one hour in the spring and backward one hour in the fall. Make sure you have set the correct date and time in the Date and Time setting. This feature is available only in some countries. |
Change the Language Displayed on the LCD | ![]() | Change your LCD language. |