Search

Site Map

Home > Copy > Copy an ID Card

Copy an ID Card

Use the [2in1(ID)] feature to copy both sides of an identification card onto one page, keeping the original card size.
image
  • Make sure the paper size is set to A4 or Letter.
  • You may copy an identification card to the extent permitted under applicable laws. For more detailed information, see the Product Safety Guide.
  1. Place your identification card face down near the upper-left corner of the scanner glass.
    2 in 1 ID (Vertical) 2 in 1 ID (Horizontal)

    image

    image
    1. 3 mm or greater (top, left)
    2. 145 mm
    3. 2 in 1 ID (Vertical): 207 mm

      2 in 1 ID (Horizontal): 102 mm

    4. Scannable area
  2. Press image [Copy].
  3. Enter the number of copies in one of the following ways:
    • Press [-] or [+] on the touchscreen.
    • Press image to display the keyboard on the touchscreen, and then enter the number of copies using the touchscreen keyboard. Press [OK].
  4. Press image[Options]>[Page Layout]>[2in1 ID Vertical] or [2in1 ID Horizontal].
    image
    You can also press [ID] for the [2in1 ID Vertical] setting.
  5. Read and confirm the displayed list of settings you have selected. When you have finished changing the settings, press [OK].
  6. Press [Mono Start] or [Colour Start].
    The machine starts scanning one side of the identification card.
  7. After the machine has scanned the first side, turn over the identification card and press [Continue] to scan the other side.
Related Information
Did you find the information you needed?

find moreaccept