Search

Home > Security > Use SSL/TLS > Manage Your Network Machine Securely Using SSL/TLS > Configure a Certificate for SSL/TLS and Available Protocols

Configure a Certificate for SSL/TLS and Available Protocols

Related Models:DCP‑T420W / DCP‑T425W / DCP‑T426W
Configure a certificate on your machine using Web Based Management before you use SSL/TLS communication.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

    image
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      • For example:

        https://SharedPrinter

      If you enable a NetBIOS name, you can also use the node name.

      • For example:

        https://brnxxxxxxxxxxxx

      The NetBIOS name can be found in the Network Configuration Report.

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Network>Network>Protocol.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Click HTTP Server Settings.
  6. Select the certificate you want to configure from the Select the Certificate drop-down list.
  7. Click Submit.
  8. Click Yes to restart your print server.
Did you find the information you needed?