Home > Introduction to Your Machine > Control Panel Overview
Control Panel Overview
- (Detener (Stop)) Power On/Off
-
- Press to stop an operation.
- Press to exit from a selected mode.
- Press to turn on the machine.
Press and hold down to turn off the machine and cancel all of the remaining operations. The Power LED blinks and stays on for a few seconds before turning itself off.
If you turn off the machine using , it will still clean the print head periodically to maintain print quality. To prolong print head life, provide better ink efficiency, and maintain print quality, keep your machine connected to a power source at all times.
- Power LED
- Indicates the machine's status.
- Warning LED
- Indicates when the machine detects an error or is in Reset Mode.
- Ink LED
- Indicates when the machine detects an ink error or is in Maintenance Mode.
- WiFi Button/LED (DCP-T420W/DCP-T425W/DCP-T426W)
-
- Press the button by itself or simultaneously with another button to configure the wireless settings or print network reports. Use only when the machine is idle.
- Press this button and Inicio Color (Color Start) simultaneously to restart the Wi-Fi if you cannot connect to your wireless network.
- Press simultaneously with (Detener (Stop)) to access the Wi-Fi Mode.
- Indicates the wireless network status.
Connected Connecting Off
- Atajo copia (Copy Shortcut)
-
- Press to make a 2 in 1 ID copy.
If necessary, one of the specific copy functions can be set as a function for this button using Web Based Management. By default, 2 in 1 ID copy is set.
- Press simultaneously with (Detener (Stop)) to access the Maintenance Mode.
- Inicio Negro (Black Start)
-
- Press to start making copies in black and white.
- Press simultaneously with Inicio Color (Color Start) to start scanning documents (in color or black and white, depending on the scan setting).
- Press simultaneously with (Detener (Stop)) to access the Reset Mode.
- Inicio Color (Color Start)
-
- Press to start making copies in full color.