Search

Site Map

Clean the Scanner

  1. Unplug the machine from the AC power outlet.
  2. Lift the document cover (1). Clean the scanner glass (2) and the white plastic (3) with a soft lint-free cloth moistened with water.
    image
  3. In the ADF unit, clean the white bar (1) and the glass strip (2) with a lint-free cloth moistened with water. (ADF models only)
    image
image
(ADF models only)

If you feel dirt or debris, clean the glass again. You may need to repeat the cleaning process three or four times. To test, make a copy after each cleaning attempt.

image

When there is a spot of dirt or correction fluid on the glass strip, the printed sample shows a vertical line.

image

After the glass strip is cleaned, the vertical line is gone.

Related Information
Did you find the information you needed?

find moreaccept