Search

Home > Security > Store Print Log to Network > Configure the Store Print Log to Network Settings Using Web Based Management

Configure the Store Print Log to Network Settings Using Web Based Management

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Administrator>Store Print Log to Network.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. In the Print Log field, click On.
  6. Configure the following settings:
    Option
    Description
    Network Folder Path
    Type the destination folder where your print log will be stored on the CIFS server (for example: \\ComputerName\SharedFolder).
    File Name
    Type the file name you want to use for the print log (up to 32 characters).
    File Type
    Select the TXT or CSV option for the print log file type.
    Time Source for Log
    Select the time source for the print log.
    Auth. Method

    Select the authentication method required for access to the CIFS server: Auto, Kerberos, or NTLMv2. Kerberos is an authentication protocol which allows devices or individuals to securely prove their identity to network servers using a single sign-on. NTLMv2 is the authentication method used by Windows to log into servers.

    • Auto: If you select Auto, NTLMv2 will be used to the authentication method.
    • Kerberos: Select the Kerberos option to use Kerberos authentication only.
    • NTLMv2: Select the NTLMv2 option to use NTLMv2 authentication only.
    image
    • For the Kerberos and NTLMv2 authentication, you must also configure the Date&Time settings or the SNTP protocol (network time server) and DNS server.
    • You can also configure the Date & Time settings from the machine's control panel.
    Username
    Type the user name for the authentication (up to 96 characters).
    image

    If the user name is part of a domain, enter the user name in one of the following styles: user@domain or domain\user.

    Password
    Type the password for the authentication (up to 32 characters).
    Kerberos Server Address (if needed)
    Type the Key Distribution Center (KDC) host address (for example: kerberos.example.com; up to 64 characters) or the IP address (for example: 192.168.56.189).
    Error Detection Setting
    Choose what action should be taken when the print log cannot be stored to the server due to a network error.
  7. In the Connection Status field, confirm the last log status.
    image
    You can also confirm the error status on the LCD of your machine.
  8. Click Submit to display the Test Print Log to Network page.
    To test your settings, click Yes and then go to the next step.
    To skip the test, click No. Your settings will be submitted automatically.
  9. The machine will test your settings.
  10. If your settings are accepted, Test OK appears on the screen.
    If Test Error appears, check all settings, and then click Submit to display the Test page again.
Did you find the information you needed?