Search

Site Map

Home > Network > Wireless Network Settings > Use Wi-Fi Direct® > Configure Wi-Fi Direct Network Using the Push Button Method

Configure Wi-Fi Direct Network Using the Push Button Method

NOTE

The wireless network connection can be used only when the optional Wireless Module is installed.

image
When the machine receives a Wi-Fi Direct request from your mobile device, the message [Wi-Fi Direct connection request received. Press [OK] to connect.] appears on the LCD. Press [OK] to connect.
  1. Press image[Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Push Button] on your machine's LCD.
    image
    • If your mobile device does not support Wi-Fi Direct, do the following:
      1. Press image[Settings]>[All Settings]>[Network]>[Wi-Fi Direct]>[Group Owner], and then press [On].
      2. Swipe up or down or press image or image to select the [Push Button].
    • If your machine displays the [All Settings] menu on the Home screen, skip the [Settings] menu.
  2. When the [Activate Wi-Fi Direct on other device. Then Press [OK].] message appears, turn your mobile device‘s Wi-Fi Direct function on (for more information, see your mobile device’s user‘s guide). Press [OK] on your machine.
  3. Do one of the following:
    • If your mobile device displays a list of machines with Wi-Fi Direct enabled, select your Brother machine.
    • If your Brother machine displays a list of mobile devices with Wi-Fi Direct enabled, select your mobile device. To search for available devices again press [Rescan].
  4. When your mobile device connects successfully, the machine's LCD displays [Connected]. Press [Close], and the press image.
Related Information
Did you find the information you needed?

find moreaccept