Search

Site Map

Home > Security > Use IPsec > Configure an IPsec Address Template Using Web Based Management

Configure an IPsec Address Template Using Web Based Management

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Network>Security>IPsec Address Template.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Click the Delete button to delete an Address Template. When an Address Template is in use, it cannot be deleted.
  6. Click the Address Template that you want to create. The IPsec Address Template appears.
  7. Configure the settings.
    Option Description
    Template Name

    Type a name for the template (up to 16 characters).

    Local IP Address

    • IP Address

      Specify the IP address. Select ALL IPv4 Address, ALL IPv6 Address, ALL Link Local IPv6, or Custom from the drop-down list.

      If you select Custom from the drop-down list, type the IP address (IPv4 or IPv6) in the text box.

    • IP Address Range

      Type the starting and ending IP addresses for the IP address range in the text boxes. If the starting and ending IP addresses are not standardised to IPv4 or IPv6, or the ending IP address is smaller than the starting address, an error will occur.

    • IP Address / Prefix

      Specify the IP address using CIDR notation.

      For example: 192.168.1.1/24

      Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.xxx are valid.

    Remote IP Address

    • Any

      If you select Any, all IP addresses are enabled.

    • IP Address

      Type the specified IP address (IPv4 or IPv6) in the text box.

    • IP Address Range

      Type the starting and ending IP addresses for the IP address range. If the starting and ending IP addresses are not standardised to IPv4 or IPv6, or the ending IP address is smaller than the starting address, an error will occur.

    • IP Address / Prefix

      Specify the IP address using CIDR notation.

      For example: 192.168.1.1/24

      Because the prefix is specified in the form of a 24-bit subnet mask (255.255.255.0) for 192.168.1.1, the addresses 192.168.1.xxx are valid.

  8. Click Submit.
    image

    When you change the settings for the template currently in use, restart your machine to activate the configuration.

Related Information
Did you find the information you needed?

find moreaccept