Search

Home > Network > Network Features > Configure and Operate LDAP Search > Change LDAP Configuration Using Web Based Management

Change LDAP Configuration Using Web Based Management

Use Web Based Management to configure your LDAP settings in a web browser.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd".
  4. Go to the navigation menu, and then click Network>Network>Protocol.
    image
    Start from image, if the navigation menu is not shown on the left side of the screen.
  5. Select the LDAP checkbox, and then click Submit.
  6. Click Yes to restart your Brother machine and activate the configuration.
  7. On your computer, in Web Based Management, go to the navigation menu, and then click Address Book>LDAP.
    • LDAP Search
    • LDAP Server Address
    • Port (The default port number is 389.)
    • Search Root
    • Authentication
    • Username

      This selection will be available depending on the authentication method used.

    • Password

      This selection will be available depending on the authentication method used.

      image
      • If the LDAP server supports Kerberos authentication, we recommend selecting Kerberos for the Authentication settings. It provides strong authentication between the LDAP server and your machine.
      • You must configure the SNTP protocol (network time server), or you must set the date, time and time zone correctly on the control panel for Kerberos authentication.
    • Kerberos Server Address

      This selection will be available depending on the authentication method used.

    • Timeout for LDAP
    • Attribute of Name (Search Key)
    • Attribute of E-mail
    • Attribute of Fax Number
    • Optional Attribute ##
  8. When finished, click Submit. Make sure the Status field reads OK.
Did you find the information you needed?