Search

Site Map

Check the Print Quality

If faded or streaked colours and text appear or if text is missing on your printouts, the print head nozzles may be clogged. Print the check sheet and look at the nozzle check pattern.
  1. Press image[Ink]>[Improve Print Quality]>[Check Print Quality].
  2. Press [Start].
    The machine prints the check sheet.
  3. Check the quality of the four colour blocks on the sheet.
  4. When an LCD message prompts you to check the print quality, do one of the following:
    • If all lines are clear and visible, press [No], and then press image to finish the Print Quality check.
    • If lines are missing (see Poor, as follows), press [Yes].

      OK

      OK

      Poor

      Poor
  5. When the LCD message prompts you to check the print quality of each colour, press the number of the pattern (1–4) that most closely matches the printing result.
  6. Do one of the following:

    • If print head cleaning is needed, press [Start] to start the cleaning procedure.

    • If print head cleaning is not needed, the menu screen reappears on the touchscreen. Press image.
  7. After the cleaning procedure is finished, the LCD message prompts you to print the check sheet again. Press [Yes], and then press [Start].
    The machine prints the check sheet again. Check the quality of the four colour blocks on the sheet again.
IMPORTANT
DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
image
When a print head nozzle is clogged, the printed sample looks like this:
image

After the print head nozzle is cleaned, the lines are gone:

image
Related Information
Did you find the information you needed?

find moreaccept