Home > Fax > Receive a Fax > Remote Fax Retrieval > Remote Retrieval Commands
Remote Retrieval Commands
| Remote Command | Option | Description |
|---|
| 95 | Change the Fax Forwarding, or Fax Storage settings |
| 1 OFF | You can select Off after you retrieve or erase all your messages. |
| 2 Fax Forwarding | One long beep means the change is accepted. If you hear three short beeps, you cannot make a change because one of the settings may not be configured correctly (for example, a Fax Forwarding number has not been registered). You can register your Fax Forwarding number by entering 4. After you register the number, Fax Forwarding will work. |
| 4 Fax Forwarding number |
| 6 Fax Storage |
| 96 | Retrieve a fax |
| 2 Retrieve all faxes | Enter the fax number of a remote fax machine to receive stored fax messages. |
| 3 Erase faxes from memory | If you hear one long beep, fax messages have been erased from memory. |
| 97 | Check the receiving status |
| 1 Fax | Check whether your machine has received any faxes. If yes, you will hear one long beep. If not, you will hear three short beeps. |
| 98 | Change the Receive Mode |
| 1 External TAD | One long beep means the change has been accepted. |
| 2 Fax/Tel |
| 3 Fax Only |
| 90 | Exit | Press 9 0 to stop remote retrieval. Wait for the long beep, then hang up. |