Type a name for this server profile (up to 15 alphanumeric characters). The machine will display this name on the LCD.

Type the path to the folder on the CIFS server where you want to send your scanned data.

Select a file name prefix from the preset names provided, or from user-defined names. The file name used for the scanned document will be the file name prefix you select, followed by the last six digits of the flatbed/ADF scanner counter and the file extension (for example: "Estimate_098765.pdf").

Select a quality setting. If you choose the User Select option, the machine will prompt users to select a setting each time they use the scan profile.

Select the file type you want to use for the scanned document. If you choose the User Select option, the machine will prompt users to select a setting each time they use the scan profile.

Select your document size from the list. This is necessary to make sure the scanned file is the correct size.

If you choose the User Select option, the machine will prompt users to select a setting each time they use the scan profile.

Select your file size from the list.

If you choose the User Select option, the machine will prompt users to select a setting each time they use the scan profile.

Select the Auto option to set the machine to correct document skewing automatically as the pages are scanned.

Select the On option to remove blank pages of the document from the scanning results.

Select the sensitivity level for detecting blank pages in the scanned data. The higher the sensitivity, the easier it is for the machine to detect blank pages.

Select the Long Edge or Short Edge option to scan both sides of the document, depending on the layout of your original.

Change the amount of background color that is removed.

Adjust your document's margins.

Split a scanned image.

When multiple documents have been scanned, you can split and save the documents separately by using this function.

Select the TIFF compression option for a black and white document.

Select the brightness level.

Select the contrast level.

To PIN-protect this profile, select On and type a four-digit PIN in the PIN Code field.

To set your authentication method, select Auto, Kerberos, or NTLMv2.

Type a user name (up to 96 characters) of a user that has permission to write data to the folder specified in the Network Folder Path field. If the user name is part of a domain, enter the user name in one of the following styles:

• user@domain
• domain\user

Type the password (up to 32 characters) associated with the user name you entered in the Username field. Type the password again in the Retype password field.