Home > Machine Settings > Change Machine Settings from Your Computer > Change Machine Settings Using Web Based Management > Access Web Based Management
Access Web Based Management
We recommend using the HTTPS security protocol when configuring settings using Web Based Management.
When you use HTTPS for Web Based Management configuration, your browser will display a warning dialog box.
- Start your web browser.
- Type "http://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).For example:
http://192.168.1.2
If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.
- For example:
http://SharedPrinter
If you enable a NetBIOS name, you can also use the node name.
- For example:
http://brnxxxxxxxxxxxx
The NetBIOS name can be found in the Network Configuration Report.
- For Mac, access Web Based Management by clicking the machine's icon on the Status Monitor screen.
- No password is required by default. Type a password if you have set one, and then click
.
If you change the protocol settings, you must restart the machine after clicking Submit to activate the configuration.