Home > Introduction to Your Brother Machine > Control Panel Overview
Control Panel Overview
The control panel will vary depending on your model.
![image](../img/GUID-C288E806-ADD8-44B9-9226-8161405FC4B9-low.gif)
- LCD (Liquid Crystal Display)
- Displays messages to help you set up and use your machine.
-
Wireless Models:
A four-level indicator shows the wireless signal strength if you are using a wireless connection.
Power On/Off Button
-
Turn on the machine by pressing
.
Turn off the machine by pressing and holding
. The LCD displays [Shutting Down] for a few seconds before going off.
- Network Buttons
-
Wired Models:
Network
Press Network to set up wired network settings.
Models with Wireless Function:
WiFi
Press the WiFi button and launch the wireless installer on your computer. Follow the on-screen instructions to set up a wireless connection between your machine and your network.
When the WiFi light is on, your Brother machine is connected to a wireless access point. When the WiFi light blinks, the wireless connection is down, or your machine is in the process of connecting to a wireless access point.
- Menu Buttons
-
- OK
-
Press to store your machine settings. After you change a setting, the machine returns to the previous menu level.
- Back
-
- Press to go back one level in the menu.
- Press to select the previous digit when setting numbers.
or
( + or -)
-
- Press to scroll through menus and options.
- Press to enter a number or to increase or decrease the number. Press and hold down
or
to scroll faster. When you see the number you want, press OK.
- Go Button
-
- Press to clear certain error messages. To clear all other errors, follow the control panel instructions.
- Press to print any data remaining in the machine's memory.
- Press to select the displayed option. After you change a setting, the machine returns to Ready mode.
- Press and hold Go for about two seconds to cancel a print job.