Search

Site Map

Print Documents Using IPPS

Related Models:HL‑L2400DW / HL‑L2400DWE / HL‑L2442DW / HL‑L2445DW / HL‑L2447DW / HL‑L2460DN / HL‑L2865DW
To print documents securely with IPP protocol, use the IPPS protocol.
  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).
    For example:

    https://192.168.1.2

    image
    • If you are using a Domain Name System or enable a NetBIOS name, you can type another name, such as "SharedPrinter" instead of the IP address.

      For example: https://SharedPrinter

    • If you enable a NetBIOS name, you can also use the node name.

      For example: https://brn123456abcdef

    • The NetBIOS name can be found in the Network Configuration Report.
  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the back of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Network>Network>Protocol.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. Make sure the IPP checkbox is selected.
    image

    If the IPP checkbox is not selected, select the IPP checkbox, and then click Submit.

    Restart your machine to activate the configuration.

    After the machine restarts, return to the machine's web page, type the password, and then in the left navigation bar, click Network>Network>Protocol.

  6. Click HTTP Server Settings.
  7. Select the HTTPS checkbox in the IPP area, and then click Submit.
  8. Restart your machine to activate the configuration.
Communication using IPPS cannot prevent unauthorised access to the print server.
Related Information
Did you find the information you needed?

find moreaccept