Search

Site Map

Home > Paper Handling > Load Paper > Load Paper in the Paper Tray > Change Machine Settings to Print on Preprinted Paper Using the Paper Tray

Change Machine Settings to Print on Preprinted Paper Using the Paper Tray

Related Models:HL‑L2400DW / HL‑L2400DWE / HL‑L2442DW / HL‑L2445DW / HL‑L2447DW / HL‑L2460DN / HL‑L2865DW
When you use preprinted paper for 2-sided printing, change the machine's settings.
image
  • DO NOT load different sizes and types of paper in the paper tray at the same time. Doing this may cause the paper to jam or misfeed.
  • If the print position is misaligned with the preprinted objects, the print position is adjustable using the Print Position setting for the paper tray.
  • Some preprinted paper may cause print stains, depending on the printing method and ink type.

Orientation

image

For 1-sided printing

  • face down
  • top edge towards the front of the paper tray
image

For automatic 2-sided printing (long edge binding)

  • face up
  • bottom edge towards the front of the paper tray
  1. Press image or image to select the following:
    1. Select [Printer]. Press OK.
    2. Select [2-sided]. Press OK.
    3. Select [Single Image]. Press OK.
  2. Press image or image to select [2-sided Feed], and then press Go.
Related Information
Did you find the information you needed?

find moreaccept