Search

Site Map

Home > Security > Network Security Features > Manage Your Network Machine Securely Using SSL/TLS > Manage Your Network Machine Securely Using Web Based Management

Manage Your Network Machine Securely Using Web Based Management

To manage your network machine securely, you must use management utilities with security protocols.

We recommend using the HTTPS protocol for secure management. To use this protocol, HTTPS must be enabled on your machine.

image
  • The HTTPS protocol is enabled by default.
  • You can change the HTTPS protocol settings using the Web Based Management screen.
  1. Start your web browser.
  2. Type "https://Common Name" in your browser's address bar (where "Common Name" is the Common Name that you assigned to the certificate; this could be your IP address, node name, or domain name).
  3. No password is required by default. Type a password if you have set one, and then click image.
  4. You can now access the machine using HTTPS.
    image
    • If you use the SNMPv3 protocol, follow the steps below.
    • You can also change the SNMP settings by using BRAdmin Professional.
  5. Click the Network tab.
  6. Click Protocol.
  7. Make sure the SNMP setting is enabled, and then click Advanced Settings.
  8. Configure the SNMP settings.
    image
    There are three options for SNMP Mode of Operation.
    • SNMP v1/v2c read-write access

      In this mode, the print server uses version 1 and version 2c of the SNMP protocol. You can use all Brother applications in this mode. However, it is not secure since it will not authenticate the user, and data will not be encrypted.

    • SNMPv3 read-write access and v1/v2c read-only access

      In this mode, the print server uses the read-write access of version 3 and the read-only access of version 1 and version 2c of the SNMP protocol.

      image
      When you use SNMPv3 read-write access and v1/v2c read-only access mode, some Brother applications (such as BRAdmin Light) that access the print server do not work correctly since they authorize the read-only access of version 1 and version 2c. If you want to use all applications, we recommend using SNMP v1/v2c read-write access mode.
    • SNMPv3 read-write access

      In this mode, the print server uses version 3 of the SNMP protocol. If you want to manage the print server securely, use this mode.

      image

      When you use SNMPv3 read-write access mode, note the following:

      • You can use only BRAdmin Professional or Web Based Management to manage the print server.
      • Except for BRAdmin Professional, all applications that use SNMPv1/v2c will be restricted. To allow the use of SNMPv1/v2c applications, use SNMPv3 read-write access and v1/v2c read-only access or SNMP v1/v2c read-write access mode.

  9. Click Submit.
Related Information
Did you find the information you needed?

find moreaccept