Search

Site Map

Home > Introduction to Your Machine > Control Panel Overview

Control Panel Overview

image

  1. Touchscreen Liquid Crystal Display (LCD)
    Access menus and options by pressing them on the touchscreen.

    From the Home screen, you can access the WiFi setup, Toner Level, Settings, Functions, and Secure Print screens.

    The Home screen displays the machine's status when the machine is idle.

    image
    1. image (Wireless Status)

      Press to configure the wireless settings.

      If you are using a wireless connection, a four-level indicator on the Home screen displays the current wireless signal strength.

      image

      • If you see image displayed as the wireless status, press it to select a wireless connection method or configure an existing wireless connection.

    2. IP Address

      If the IP Address setting in the Screen Settings menu is turned on, your machine's IP address appears on the Home screen.

    3. image [Secure Print]

      Press to access the Secure Print option.

    4. image [Toner]

      Displays the remaining toner life. Press to access the [Toner] menu.

    5. image [Settings]

      Press to access the [Settings] menu.

      Use the Settings menu to access all of your machine's settings.

      If the Setting Lock is set to On, a lock icon image appears on the LCD. You must unlock the machine to change any settings.

    6. image [Functions]

      Press to access the Functions screen.

      • image [Web]

        Press to connect your machine to an Internet service.

      image
    image (Warning) icon
    image

    The warning icon image appears when there is an error or maintenance message. Press image to view it, address the issue, and then press image to return to Ready Mode.

  2. image Power On/Off
    • Turn on the machine by pressing image.
    • Turn off the machine by pressing and holding down image.
  3. LED Power Indicator
    The LED lights up depending on the machine’s power status.
  4. Touchpanel
    image (Back)
    Press to go back to the previous menu.
    image (Home)
    Press to return to the Home screen.
    image (Cancel)
    Press to cancel an operation or to cancel a programmed print job and clear it from the machine’s memory.
  5. Near Field Communication (NFC)
    Use card authentication, if applicable, by touching your Integrated Circuit Card (IC Card) to the NFC symbol on the machine.
Related Information
Did you find the information you needed?

find moreaccept