FAQs & Troubleshooting
![]() |
Popular |
75 Results
- 1Combination of fabric, thread and needle
- 2When thread got tangled.
- 3Place a spool of thread on a spool pin.
- 4Where do I put the oil in my machine?
- 5Fabric and Thread
- 6How do I create a space between characters?
- 7"Saving..." message appearing on the LCD. What does it mean?
- 8"The pattern is too large for the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 9"The needle is down. Press the needle position button to raise the needle." message appearing on the LCD. What does it mean and how do I clear it?
- 10"Raise the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 11When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 12"Can not save to this disk. The disk may be defective. Change the disk and try to save again." message appearing on the LCD. What does it mean and how do I clear it?
- 13"Select a pattern." message appearing on the LCD. What does it mean and how do I clear it?
- 14Embroidery
- 15"Not enough available memory to save the pattern. Delete another pattern? Change the floppy disk?" message appearing on the LCD. What does it mean and how do I clear it?
- 16"This disk is write protected. Can not delete the pattern. Disengage the write protection and try to delete again." message appearing on the LCD. What does it mean and how do I clear it?
- 17"This disk is write protected. Can not save the pattern. Disengage the write protection and save again." message appearing on the LCD. What does it mean and how do I clear it?
- 18"Change to the medium or large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 19"When the speed controller is set to control the zigzag stitch width, the "Start/Stop" button does not operate." appears on the LCD.
- 20The thread tension is incorrect.
- 21"This editing function cannot be used when the pattern is out of the red outline. Use this function after moving the pattern." message appears on the LCD. What does it mean?
- 22"Lower the buttonhole lever." message appearing on the LCD. What does it mean and how do I clear it?
- 23"The "Start/Stop" button does not operate with the foot controller attached. Remove the foot controller." appears on the LCD.
- 24Why is the outline sewing off the pattern?
- 25Why does the needle keep breaking?
- 26It is difficult to pass the thread through the needle bar thread guide(hook).
- 27"Formatting the floppy disk." message appearing on the LCD. What does it mean?
- 28"This disk is not formatted. Do you want to format this disk? Formatting the disk will erase any data currently on the disk." message appearing on the LCD. What does it mean and how do I clear it?
- 29"This button does not operate when the embroidery unit is attached Turn off the power and remove the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
- 30"OK to save the current setting?" message appearing on the LCD. What does it mean and how do I clear it?
- 31"Check and rethread the upper thread." message appearing on the LCD. What does it mean and how do I clear it?
- 32How do I remove the presser foot holder?
- 33"There is a pattern included that can not be saved to a floppy disk. Save the pattern in the machine's memory." message appearing on the LCD. What does it mean and how do I clear it?
- 34"Can not read this disk. This disk may be defective." message appearing on the LCD. What does it mean and how do I clear it?
- 35"Change to the large embroidery frame." message appearing on the LCD. What does it mean and how do I clear it?
- 36"This button does not operate when the embroidery unit is not attached. Turn off the powert and attach the embroidery unit." message appearing on the LCD. What does it mean and how do I clear it?
- 37"There is no embroidery card in card slot. Insert an embroidery card." message appearing on the LCD. What does it mean and how do I clear it?
- 38Why does my thread keep jamming?
- 39How do I sew an applique?
- 40Fabrics and stabilizer material for embroidery
- 41"Deleting..." message appearing on the LCD. What does it mean?
- 42"There is not much thread remaining in the bobbin." message appearing on the LCD. What does it mean and how do I clear it?
- 43"This function can not be used while the machine is in twin needle mode. Cancel twin needle mode and choose the function again." message appearing on the LCD. What does it mean and how do I clear it?
- 44"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appearing on the LCD. What does it mean and how do I clear it?
- 45"The pattern combination is too large for the extra large embroidery frame. If you plan to add more patterns, rotate the pattern combination." message appears on the LCD. What does it mean and how do I clear it?
- 46"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 47"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 48Why does the lower thread keep breaking?
- 49How do I correctly install a bobbin?
- 50How do I thread my machine?