FAQs & Troubleshooting
![]() |
Popular |
94 Results
- 1How to Embroider on Pet Collar. [Video instructions]
- 2How to set up the cap frame. [Video instructions]
- 3How to Embroider on Shoes. [Video instructions]
- 4Creating Beautiful Embroidery ( Hooping techniques )
- 5How to Embroider on Cap. [Video instructions]
- 6When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 7The thread tension is incorrect.
- 8Color thread table
- 9How to Embroider on Bag. [Video instructions]
- 10Loops appear on the surface of the fabric when embroidering.
- 11How do I use the embroidery sheet ?
- 12Colors of Tajima (.dst) embroidery data
- 13How to set up the cap frame driver. [Video instructions]
- 14The needle threader cannot be used.
- 15How do I wind the bobbin?
- 16Embroidery pattern does not sew out correctly.
- 17"OK to delete the selected pattern?" message appears on the LCD.What does it mean?
- 18How do I embroider when I use fabric that cannot have stabilizer material affixed with an iron or adhesive?
- 19Maintenance (Oiling the machine)
- 20"Preventive maintenance is recommended" appears on the LCD.
- 21How to select the "Eco Mode" or "Shutoff Support Mode" ?
- 22Why does the upper thread keep breaking?
- 23How do I thread the machine? (Threading the upper thread)
- 24How do I install the bobbin wound with thread?
- 25Fabric/stabilizer compatibility chart
- 26How to use the Flat brim cap frame (PRCF5/PRCF5AP) [Video instructions]
- 27The upper thread does not reach the bobbin thread when embroidering begins.
- 28"No more patterns can be added to this combination." message appears on the LCD. What does it mean?
- 29"Change to a larger embroidery frame." message appears on the LCD. What does it mean?
- 30How do I change the needle?
- 31What is DST ?
- 32"The USB media is write-protected so the data cannot be saved. Cancel the write-protection before trying to save the data." message appears on the LCD. What does it mean and how do I clear it?
- 33"Not enough space. Delete some patterns or use a different USB media." message appears on the LCD. What does it mean?
- 34Why does the needle keep breaking?
- 35Stabilizers (Backing)
- 36LED pointer does not indicate the position correctly.
- 37Bobbin thread does not wind neatly on the bobbin.
- 38There are needle cuts or holes in the garment.
- 39Although the thread is not broken, a broken thread error occurs and the machine stops.
- 40The bobbin thread breaks.
- 41"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 42"This pattern cannot be used." message appears on the LCD. What does it mean?
- 43"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 44How do I attach Iron-On Stabilizer (Backing) to Fabric ?
- 45Creating Beautiful Embroidery (Threads)
- 46How do I adjust the tension of the bobbin thread ?
- 47How do I restart embroidering when the thread breaks or the bobbin thread runs out while embroidering?
- 48Maintenance (Cleaning the thread paths of the upper threads)
- 49Maintenance (Cleaning the bobbin case)
- 50"Needle threader is in threading position." message appears on the LCD. What does it mean and how do I clear it?