FAQs & Troubleshooting
![]() |
Popular |
325 Results
- 1List of Error Messages for CanvasWorkspace (ErrSxx / NoteSxx)
- 2Mat and Cutting Blade Combinations
- 3About Blade Extension, Cutting Pressure and Mat
- 4List of Error Messages for CanvasWorkspace (Exxxxx / Nxxxxx)
- 5Downloading Optional Design Pattern Collection
- 6Adjusting the Blade Extension
- 7How to Install and Uninstall the Holder
- 8Mat and Material Combinations
- 9How to register Your Machine with CanvasWorkspace
- 10Cut a thin fabric for the quilt piece. (How to use the High Tack Adhesive Fabric Support Sheet.)
- 11List of Error Messages for CanvasWorkspace (Others)
- 12What type of data can my ScanNCut machine be used?
- 13Can I create the cutting data for ScanNCut from vector graphics data?
- 14The mat is fed in at an angle and is not fed during cutting / drawing.
- 15How do I recall a saved data from the machine's memory or USB flash drive?
- 16E03006 appears on the computer screen.
- 17E94002 appears on the computer screen.
- 18How to connect my machine to a wireless network using the Setup Wizard
- 19The mat or the material catches on a feed roller during cutting/drawing.
- 20Instructions for sending patterns created in CanvasWorkspace to the cutting machine for cutting or drawing.
- 21Support OS Information about ScanNCut Link Plug-in for Adobe® Illustrator®
- 22E10006 appears on the computer screen.
- 23How To Change the Registered Machine Number That Imports The Optional Pattern Collection (Ex. Disney Pattern and Calligraphy Pattern/Font)
- 24E10004 appears on the computer screen.
- 25E00001 appears on the computer screen.
- 26Can I create the cutting data for ScanNCut from the image data?
- 27"Connection Fail : Err-05" appears on the LCD Display Screen. What does it mean?
- 28E99902 appears on the computer screen.
- 29An error appears when trying to import a DXF file.
- 30Where can I purchase any consumables or options for Brother Cutting Machine?
- 31I adjust the blade extension and the cut pressure to the setting described in the Quick Reference Guide. But the result of cutting the material was not good.
- 32There are deep cuts completely through the mat.
- 33ErrS90 appears on the computer screen.
- 34ErrS12 appears on the computer screen.
- 35E01001 appears on the computer screen.
- 36E00007 appears on the computer screen.
- 37FC1 files on USB flash drives of optional patterns cannot be imported into CanvasWorkspace.
- 38Cutting/Drawing by Tracing an Image
- 39How to create an account for CanvasWorkspace
- 40Important Notice for using the Foil Transfer Starter Kit
- 41The Calligraphy Font in the USB Flash Drive is Not Displayed
- 42How can I transfer the created/edited data between CanvasWorkspace and my machine via a wireless network?
- 43How long will the mat last?
- 44The material to be cut/drawn or original to be scanned peels off during cutting/scanning.
- 45If the blade cuts through the mat, can tape, etc., be attached to the back so the mat can be reused?
- 46Cut the fabric other than quilt pieces. (How to use the Iron-On Fabric Appliqué Contact Sheet.)
- 47E11010 appears on the computer screen.
- 48ErrS02 appears on the computer screen.
- 49E94004 appears on the computer screen.
- 50How to Use the Enhanced Image Tracing on CanvasWorkspace for PC [Video]