FAQs & Troubleshooting
![]() |
Popular |
42 Results
- 1Combination of fabric, thread and needle
- 2When should I use the extra spool pin?
- 3Fabric and Thread
- 4When thread got tangled.
- 5It is difficult to pass the thread through the needle bar thread guide(hook).
- 6How do I remove the presser foot holder?
- 7Why does the lower thread keep breaking?
- 8How do I load the spool into the thread cassette?
- 9"Return the bobbin winding shaft to left." message appearing on the LCD. What does it mean?
- 10How do I wind the bobbin?
- 11Where do I put the oil in my machine?
- 12"No more stitches can be combined." message appearing on the LCD. What does it mean?
- 13How do I sew such as vinyl, leather, quilting layers and velvet?
- 14How to I attach the spool of thread to my machine?
- 15"Can not change." message appearing on the LCD. What does it mean?
- 16"Lower the buttonhole lever." appears on the LCD.
- 17The thread tension is incorrect.
- 18How do I thread the needle?
- 19"Lift the buttonhole lever." appears on the LCD.
- 20Place a spool of thread on a spool pin.
- 21When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 22How do I sew buttonholes?
- 23How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 24Upper Threading (Using the twin needle)
- 25"Change the speed controller mode to "OFF"." message appearing on the LCD. What does it mean?
- 26"Change to the single needle mode." appears on the LCD.
- 27How do I sew an applique?
- 28How do I correctly install a bobbin?
- 29How do I manually thread the needle?
- 30"Lower the presser foot lever." appears on the LCD.
- 31"Saving..." message appearing on the LCD. What does it mean?
- 32"Winding bobbin thread." message appearing on the LCD. What does it mean?
- 33"The safety device has been activated." appears on the LCD.
- 34Why does the upper thread keep breaking?
- 35"Press needle position button to raise needle." appears on the LCD.
- 36"Delete the selected pattern." message appearing on the LCD. What does it mean?
- 37"Insert thread cassette." message appearing on the LCD. What does it mean?
- 38Why does the needle keep breaking?
- 39The thread is looping when I try to wind a bobbin.
- 40"Disconnect the foot control." appears on the LCD.
- 41Why does my thread keep jamming?
- 42How do I sew a blind hem?