FAQs & Troubleshooting
![]() |
Popular |
57 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How do I hoop the fabric in the embroidery frame?
- 3Tutorial videos on how to use the machine [Video instructions]
- 4How do I adjust thread tension for embroidering?
- 5How do I select or display patterns according to the embroidery frame size?
- 6How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 7How do I adjust the sensitivity of the operation keys?
- 8When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 9Where do I put the oil in my machine?
- 10Embroidery
- 11Stitches are skipped
- 12How do I retrieve the patterns from the machine’s memory?
- 13How do I edit a single letter in the embroidery pattern?
- 14Fabric puckers
- 15How do I change the font type in the embroidery pattern?
- 16How do I clean the race?
- 17"Preventive maintenance is recommended" appears on the LCD.
- 18How do I thread the machine (Threading the upper thread)?
- 19"USB media error" message appears on the LCD. What does it mean?
- 20"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 21How do I set the bobbin ?
- 22How do I wind the bobbin?
- 23Upper thread breaks.
- 24"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 25"Pattern extends to the outside of embroidery frame. Add no additional characters." message appears on the LCD. What does it mean?
- 26How do I change the needle ?
- 27"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 28"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 29"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 30"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 31"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 32"This USB media cannot be used." message appears on the LCD. What does it mean?
- 33Needle breaks.
- 34"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 35How do I save the embroidery patterns in the machine’s memory?
- 36How do I enter a line feed in the embroidery pattern?
- 37"Not enough available memory to save." message appears on the LCD. What does it mean?
- 38"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 39When the thread became tangled under the bobbin winder seat
- 40How do I attach or remove the embroidery frame ?
- 41How do I remove or attach the presser foot ?
- 42"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 43Bobbin thread breaks
- 44"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 45How do I remove or attach the Embroidery foot ?
- 46How do I attach or remove the Embroidery Unit?
- 47"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 48"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 49"Cannot change the configuration of the characters." message appears on the LCD. What does it mean?
- 50"Data volume is too large for this pattern." message appears on the LCD. What does it mean?