FAQs & Troubleshooting
![]() |
Popular |
58 Results
- 1How to use the Multi-purpose Screwdriver.
- 2How to use the Multi-purpose Screwdriver. [ Position “1” ]
- 3How to use the Multi-purpose Screwdriver. [ Position “2” ]
- 4How to use the Multi-purpose Screwdriver. [ Position “3” ]
- 5"There is no needle plate cover. Attach a needle plate cover." message appears on the LCD. What does it mean?
- 6How do I remove or attach the Embroidery foot ?
- 7How do I change the needle ?
- 8How do I clean the race?
- 9How do I adjust an alternate bobbin case(with pink marking or no marking) using an embroidery pattern?
- 10"OK to delete the selected pattern?" message appears on the LCD. What does it mean?
- 11"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 12When I sew an embroidery pattern design exported as DST format in PE-DESIGN, how do I specify whether or not the jump stitches are cut on the embroidery machine of the Innov-is series?
- 13How do I thread my machine ?
- 14"Turn off the power and replace the needle plate." message appears on the LCD. What does it mean?
- 15"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 16"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 17When tansferring an embroidery data from PE-DESIGN 11 to the embroidery machine connected to the computer with a USB cable, the message "Disk full while accessing [filename]." appears.
- 18"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 19How do I adjust the clock on the display?
- 20Where do I put the oil in my machine?
- 21"Use the presser foot lifter button to lower the presser foot." message appears on the LCD. What does it mean?
- 22When I create an embroidery pattern design on PE-DESIGN(PE-DESIGN, PE-DESIGN Lite, or PED-Basic), what Design Page Size is my sewing machine?
- 23Fabrics and stabilizer material for embroidery
- 24Embroidery
- 25If the thread breaks during sewing.
- 26"This file exceeds the data capacity and cannot be used. Use a suitable size file." message appears on the LCD. What does it mean?
- 27"This file cannot be used." message appears on the LCD. What does it mean?
- 28"Attach the embroidery frame." message appears on the LCD. What does it mean?
- 29"Failed to save file." message appears on the LCD. What does it mean?
- 30"This USB media is incompatible." message appears on the LCD. What does it mean?
- 31"Transmitting by USB" message appears on the LCD. What does it mean?
- 32"Retrieving the pattern. Wait a moment." message appears on the LCD. What does it mean?
- 33"Preventive maintenance is recommended" appears on the LCD.
- 34"Set the clock." message appears on the LCD. What does it mean?
- 35"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 36How do I change the volume of operation sounds or alarm sounds?
- 37How do I set the bobbin ?
- 38How do I wind the bobbin?
- 39"OK to automatically lower the presser foot?" message appears on the LCD. What does it mean?
- 40"The upper thread may not be threaded correctly. Thread the upper thread from the beginning." message appears on the LCD. What does it mean?
- 41"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 42"The pockets are full. Delete a pattern." message appears on the LCD. What does it mean?
- 43"This USB media cannot be used." message appears on the LCD. What does it mean?
- 44"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 45"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 46Upper threading (Point)
- 47"The shutoff support mode has been activated. Turn off the machine." message appears on the LCD. What does it mean?
- 48How do I attach or remove the embroidery frame ?
- 49How do I attach or remove the Embroidery Unit?
- 50"Lower the presser foot lever." message appears on the LCD. What does it mean?