FAQs & Troubleshooting
![]() |
Popular |
51 Results
- 1How do I adjust thread tension for embroidering?
- 2Tutorial videos on how to use the machine [Video instructions]
- 3How do I hoop the fabric in the embroidery frame?
- 4How do I adjust the sensitivity of the operation keys?
- 5How do I save the embroidery patterns in the machine’s memory?
- 6How do I change the font type in the embroidery pattern?
- 7How do I change the needle ?
- 8How do I attach or remove the embroidery frame ?
- 9How do I wind the bobbin?
- 10"The bobbin thread is almost empty." message appears on the LCD. What does it mean?
- 11How do I attach or remove the Embroidery Unit?
- 12Stitches are skipped
- 13How do I remove or attach the Embroidery foot ?
- 14How do I retrieve the patterns from the machine’s memory?
- 15Where do I put the oil in my machine?
- 16"OK to recall and resume previous memory?" message appears on the LCD. What does it mean?
- 17"A malfunction occurred. Turn the machine off, then on again." message appears on the LCD. What does it mean?
- 18Embroidery
- 19Fabric puckers
- 20How do I edit a single letter in the embroidery pattern?
- 21How do I thread the machine (Threading the upper thread)?
- 22"USB media is not loaded. Load USB media." message appears on the LCD. What does it mean?
- 23"Data volume is too large for this pattern." message appears on the LCD. What does it mean?
- 24"The safety device has been activated. Is the thread tangled? Is the needle bent?" message appears on the LCD. What does it mean?
- 25"The bobbin winder safety device has activated. Is the thread tangled?" message appears on the LCD. What does it mean?
- 26Needle breaks.
- 27Upper thread breaks.
- 28How do I remove or attach the presser foot ?
- 29"USB media error" message appears on the LCD. What does it mean?
- 30How do I clean the race?
- 31Bobbin thread breaks
- 32"Pattern extends to the outside of embroidery frame." message appears on the LCD. What does it mean?
- 33How do I enter a line feed in the embroidery pattern?
- 34"F**" appears on the LCD. What does it mean?
- 35"The USB media was changed. Do not change the USB media while it is being read." message appears on the LCD. What does it mean?
- 36"Check and rethread the upper thread." message appears on the LCD. What does it mean?
- 37"Not enough available memory to save." message appears on the LCD. What does it mean?
- 38"Pattern extends to the outside of embroidery frame. This function cannot be used at this time." message appears on the LCD. What does it mean?
- 39"Cannot change the font since some letters are not included to the selected font." message appears on the LCD. What does it mean?
- 40How do I set the bobbin ?
- 41"Lower the presser foot lever." message appears on the LCD. What does it mean and how do I clear it?
- 42"This USB media cannot be used." message appears on the LCD. What does it mean?
- 43"Cannot recognize the data for the selected pattern. The data may be corrupted." message appears on the LCD. What does it mean and how do I clear it?
- 44"There is a pattern included that cannot be saved to USB media. Save the pattern in the machine's memory." message appears on the LCD. What does it mean?
- 45"Selected pattern field extends to the outside of the embroidery frame." message appears on the LCD. What does it mean?
- 46"Preventive maintenance is recommended" appears on the LCD.
- 47"Cannot recognize the data for the selected pattern. The data may be corrupted. Please turn off the power and turn on again." message appears on the LCD. What does it mean?
- 48"Not enough available memory to save the pattern. Delete another pattern?" message appears on the LCD. What does it mean?
- 49"The carriage of the embroidery unit will move. Keep your hands etc. away from the carriage." message appears on the LCD. What does it mean?
- 50"This pattern cannot be used." message appears on the LCD. What does it mean?