FAQs & Troubleshooting
![]() |
Popular |
52 Results
- 1How do I install the bobbin wound with thread? (For models equipped with the quick-set bobbin)
- 2Where do I put the oil in my machine?
- 3Combination of fabric, thread and needle
- 4Fabric and Thread
- 5Place a spool of thread on a spool pin.
- 6The bobbin thread cannot be pulled up.
- 7How to use the Bi-level Foot. (Optional accessory : SA103/F081, SA104/F082) [Video instructions]
- 8How to use the Blind Stitch Foot. (Optional accessory : SA133 / F017N, SA134 / F018N) [Video instructions]
- 9How do I wind the bobbin? (For models equipped with the fast bobbin winding system)
- 10How to use the Dynamic Walking Foot. (Optional accessory : SA101 / F085 / F085AP) [Video instructions]
- 11How to use the Quilting Foot. (Optional accessory : SA129 / F005N, SA187 / F061) [Video instructions]
- 12When thread got tangled.
- 13How do I thread my machine? (For models equipped with the needle threader)
- 14The thread tension is incorrect.
- 15How do I correctly install a bobbin?
- 16The machine does not make stitches
- 17How do I change the needle ?
- 18How to use the Piping Foot. (Optional accessory : SA192 / F067) [Video instructions]
- 19How to use the Adjustable Zipper and Piping Foot. (Optional accessory : SA161 / F036N) [Video instructions]
- 20How to use the Walking Foot. (Optional accessory : SA140 / F033N, SA107 / F034N, SA169 / F050N, SA188 / F062, SA132 / F016N) [Video instructions]
- 21It is difficult to pass the thread through the needle bar thread guide(hook).
- 22How do I clean the machine? (Cleaning the race)
- 23Why does the lower thread keep breaking?
- 24F** or "F*" appears on the LCD. What does it mean?
- 25How do I draw up the lower thread by hand? (For models equipped with the quick-set bobbin)
- 26How do I thread my machine? (Threading the needle manually [without using the needle threader])
- 27An "E2" message appears on the panel.
- 28Tangled thread on wrong side of fabric
- 29How do I remove or attach the presser foot ?
- 30How to use the 1/4 inch Piecing Foot. (Optional accessory : SA125 / F001N, SA185 / F057) [Video instructions]
- 31When I press the Start-Stop Button or Foot Controller, my machine makes a whirring noise, but the Needle bar does not move.
- 32An "E6" message appears on the panel.
- 33An "E5" message appears on the panel.
- 34An "E4" message appears on the panel.
- 35An "E1" message appears on the panel.
- 36Why does the upper thread keep breaking?
- 37How do I sew such as vinyl, leather, quilting layers and velvet?
- 38For better results when sewing stretch fabrics
- 39Why does my thread keep jamming?
- 40Why does the needle keep breaking?
- 41Why won't the machine pick up the bobbin thread?
- 42How do I sew buttonholes?
- 43How do I sew an applique?
- 44How do I sew hook-and-loop fasteners(hook-and-loop tapes)?
- 45Upper threading (Point)
- 46How to use the Narrow Zipper Foot. (Optional accessory : SA208/F079) [Video instructions]
- 47How to use the Concealed Zipper Foot. (Optional accessory : SA102/F080) [Video instructions]
- 48How do I remove or attach the presser foot holder?
- 49Incorrect thread tension
- 50Upper thread tightened up