Home > Settings > Edit Settings > Paper Size Setup
Paper Size Setup
Use the Paper size setup to add paper sizes not available in the Paper Size list of the device driver.
Before you print using a paper size other than the available ones, you must register the new paper size by sending it to the device.
Printing with a paper size not registered with the device may produce incorrect print results.
- Paper list
Displays the list of registered paper sizes.
Displays the Paper size setup dialog box to register a new paper size.
- NOTE
- Do not register a paper size already registered, to avoid incorrect print results. To use paper of the same size as one that is currently registered, select the size you want from the Paper list, and then change and overwrite the settings from
.
-
Edits the settings for the selected paper format.
To save the selected paper format with the new settings, click Apply. To add a paper format with the new settings, change the name in the Paper size name box, and then click Apply.
Deletes the selected paper format. A deleted paper format cannot be restored.
- Current paper setting
Select the paper size from the registered options.
Paper size setup Dialog Box
- Paper size name
Type in the name of the paper format to be added.
- Automatic detection
Retrieves and displays the information of the paper set in the device.
Place the device in idle when using this option. The device may malfunction if you try to configure it while it is processing or printing a print job. - Paper types
Select the paper type.
- Cancel
Cancels the settings and closes the dialog box. The settings will remain unchanged.
- Add
Adds the paper format and applies the settings.
Current paper setting Tab
Specify details for the paper format to be added.
Advanced printing adjustments Tab
- Energy rank
Adjust the amount of heat (energy) from the Print Head, for example, with special paper.
- There may be contrast variations in the print result due to the operating environment and media used. Modify the settings as necessary.
- If you increase the Energy rank setting, the print result will be darker, and the print speed may be slower.
- If the barcode on the printed label is difficult to read, adjust the Energy rank setting.
- Printing reference point adjustment
Adjust the position of the reference point (point of origin for printing). This corrects printing misalignments resulting from differences in models or from the fixed margins of some software.
Tear adjust
Adjust the cutting position when the paper is cut using the Tear Bar.
- Media sensor (transparent type/gap)
Adjust the precision with which the transmissive/gap sensor detects the gaps (spacing) for die-cut labels and the amount of light emitted by the sensor.
Settings can be specified when Paper types is set to Die-cut label.
The settings for Media sensor(Transmissive/Gap) in the Device Settings window can influence the detection and calibration results. Make sure you specify the appropriate values.Example settings:
Setting EX1 Setting EX2 Device Settings +2 -2 Paper size setup +2 +2 Actual effect 4 0 - Media sensor (reflective type/gap)
Adjust the precision with which the reflective/black mark sensor detects black marks and the amount of light emitted by the sensor.
The settings for Media sensor(Reflective/Bar) in the Device Settings window can influence the detection and calibration results. Make sure you specify the appropriate values.Example settings:
Setting EX1 Setting EX2 Device Settings +2 -2 Paper size setup +2 +2 Actual effect 4 0