Search

Site Map

Home > Edit Labels > Create Barcode Labels > Create and Print Barcodes

Create and Print Barcodes

The Label Printer is not designed exclusively for creating barcode labels. Always confirm that barcode labels can be read by a barcode reader.

For best results, print barcode labels in black ink on white tape. Some barcode readers may not be able to read barcode labels created using coloured tape or ink.

You can print up to five barcodes on a single label.

NOTE
  • The number of characters or lines you can add varies depending on the tape width.
  • Use the [Large] setting for [Width] or [Size] whenever possible. Some barcode readers may not be able to read barcode labels created using the [Small] setting.
  • Continuously printing a large number of labels with barcodes can overheat the Print Head, which may affect the print quality.
  • Symbols are available for the CODE39, CODE128, CODABAR, or GS1-128 protocols.
  • The "C.Digit" (Check Digit) attribute is available for the CODE39, I-2/5, and CODABAR protocols.

PT-E310BT

  1. Press image and then press image.
  2. Press image, image, image, or image to select an attribute, and then press OK.
    For more information, see Related Information.
  3. Enter the barcode data.
  4. To select a character, press image and then press image. Press image or image to select the character you want, and then press OK.
  5. Press OK.

PT-E510/PT-E560BT

  1. Press image.
  2. Press image, image, image, or image to select an attribute, and then press OK.
    For more information, see Related Information.
  3. Enter the barcode data.
  4. To select a character, press image. Press image or image to select the character you want, and then press OK.
  5. Press OK.
Related Information
Did you find the information you needed?

find moreaccept