Search

Site Map

Home > Network > Network Features > Synchronise Time with the SNTP Server Using Web Based Management > Configure Date and Time Using Web Based Management

Configure Date and Time Using Web Based Management

Related Models:ADS‑1350W / ADS‑1800W
Configure the date and time to synchronise the time used by the machine with the SNTP time server.

This feature is not available in some countries.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is your machine's IP address).

    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Administrator>Date&Time.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. Verify the Time Zone settings.
    image
    Select the time difference between your location and UTC from the Time Zone drop-down list. For example, the time zone for Eastern Time in the USA and Canada is UTC-05:00.
  6. Select the Synchronize with SNTP server checkbox.
  7. Click Submit.
    image
    You can also configure date and time manually.
Related Information
Did you find the information you needed?

find moreaccept