Search

Home > Network > Network Features > Synchronise Time with the SNTP Server Using Web Based Management > Configure the SNTP Protocol Using Web Based Management

Configure the SNTP Protocol Using Web Based Management

Related Models:ADS‑1350W / ADS‑1800W
Configure the SNTP protocol to synchronise the time the machine uses for authentication with the time kept by the SNTP time server.

This feature is not available in some countries.

  1. Start your web browser.
  2. Type "https://machine's IP address" in your browser's address bar (where "machine's IP address" is the machine's IP address).
    For example:

    https://192.168.1.2

  3. If required, type the password in the Login field, and then click Login.
    image
    The default password to manage this machine’s settings is located on the bottom of the machine and marked "Pwd". Change the default password by following the on-screen instructions when you first log in.
  4. In the left navigation bar, click Network>Network>Protocol.
    image
    If the left navigation bar is not visible, start navigating from image.
  5. Select the SNTP checkbox to activate the settings.
  6. Click Submit.
  7. Restart your Brother machine to activate the configuration.
  8. Next to the SNTP checkbox, click Advanced Settings and configure your settings as needed.
    Option
    Description
    Status
    Displays whether the SNTP protocol is enabled or disabled.
    Synchronization Status
    Confirm the latest synchronisation status.
    SNTP Server Method
    Select AUTO or STATIC.
    • AUTO

      If you have a DHCP server in your network, the SNTP server will obtain the address from that server automatically.

    • STATIC

      Type the address you want to use.

    Primary SNTP Server Address

    Secondary SNTP Server Address

    Type the server address (up to 64 characters).

    The secondary SNTP server address is used as a backup to the primary SNTP server address. If the primary server is unavailable, the machine will contact the secondary SNTP server.

    Primary SNTP Server Port

    Secondary SNTP Server Port

    Type the port number (1-65535).

    The secondary SNTP server port is used as a backup to the primary SNTP server port. If the primary port is unavailable, the machine will contact the secondary SNTP port.

    Synchronization Interval
    Type the number of hours between server synchronisation attempts (1-168 hours).
  9. Click Submit.
Did you find the information you needed?