Search

Site Map

Home > Routine Maintenance > Clean Your Brother Machine > Clean the Print Head from Your Brother Machine

Clean the Print Head from Your Brother Machine

To maintain good print quality, the machine automatically cleans the print head when needed. If there is a print quality problem, start the cleaning process manually.
  • Clean the print head if there is a horizontal line or a blank space in the text or graphics on printed pages. Depending on the problem colour, select to clean Black only, three colours at a time (Yellow/Cyan/Magenta), or all four colours at once.
  • Cleaning the print head consumes ink.
  • Cleaning too often uses ink unnecessarily.
IMPORTANT
DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.

DCP-J1050DW/MFC-J1010DW

  1. Press image (Ink) or INK on the control panel.
  2. Press image or image to make your selections:
    1. Select [Print Head Cleaning]. Press OK.
    2. Select [Black only], [Colour only], or [All]. Press OK.
    3. Select [Normal], [Strong], or [Strongest]. Press OK.
  3. Press image.
    The machine cleans the print head.
image
  • If the print quality has not improved, repeat the cleaning process. If the print quality does not improve after repeating the cleaning process several times, contact Brother customer service or your local Brother dealer.
  • You can also clean the print head from your computer.

DCP-J1140DW

  1. Press image[Ink]>[Print Head Cleaning].
  2. Press [Black only], [Colour only], or [All].
  3. Press [Normal], [Strong], or [Strongest].
  4. Press [Start].
    The machine cleans the print head.
image
  • If the print quality has not improved, repeat the cleaning process. If the print quality does not improve after repeating the cleaning process several times, contact Brother customer service or your local Brother dealer.
  • You can also clean the print head from your computer.
Related Information
Did you find the information you needed?

find moreaccept