Search

Site Map

Set the Machine to Power Off Automatically

The Auto Power Off feature can reduce power consumption. Set the amount of time that the machine must be in Sleep Mode before it automatically powers off. When this feature is set to [Off], you must power off the machine manually.

To turn on the machine after the Auto Power Off feature has turned it Off, press image.

image

The machine does not power off automatically when:

  • Fax jobs are stored in the machine's memory. (MFC-J1010DW)
  • An error prevents the Fax Journal report from printing. (MFC-J1010DW)
  • The machine is connected to a telephone line. (MFC-J1010DW)
  • The machine is connected to a wireless network.
  • [WLAN Enable] is set to [On].

DCP-J1050DW/MFC-J1010DW

  1. Press Settings.
  2. Press image or image to make your selections:
    1. Select [General Setup]. Press OK.
    2. Select [Auto Power Off]. Press OK.
    3. Select [Off], [1 hour], [2 hours], [4 hours], or [8 hours]. Press OK.
  3. Press Stop/Exit.

DCP-J1140DW

  1. Press image[Settings]>[All Settings]>[General Setup]>[Auto Power Off].
  2. Press image or image to display the [Off], [1 hour], [2 hours], [4 hours], or [8 hours] option, and then press the option you want.
  3. Press image.
Related Information
Did you find the information you needed?

find moreaccept