Home > Machine Settings > Change Machine Settings from the Control Panel > Settings and Features Tables > Settings Tables (2.7" Touch Panel DCP models)
Settings Tables (2.7" Touch Panel DCP models)
[Settings]
[Settings]
Level 1 | Level 2 | Descriptions |
---|---|---|
Toner | Toner Life | View the approximate remaining toner life. |
Test Print | Print a test page. | |
Toner Cartridge Check | View the installed toner cartridge information on the LCD, for example, if the toner cartridge is genuine. | |
Network | Wired LAN | Access the Wired LAN setting menus. |
WLAN(Wi-Fi) | Access the WLAN setting menus. | |
Tray Setting | - | Access the tray setting menus. |
Wi-Fi Direct | - | Access the Wi-Fi Direct setting menus. |
Eco Mode | - | Access the Eco Mode setting menu. |
All Settings | - | Configure the detailed settings. |
[General Setup]
Level 3 | Level 4 | Level 5 | Descriptions |
---|---|---|---|
Tray Setting | Paper Type | - | Set the type of paper in the paper tray. |
Paper Size | - | Set the paper size in the paper tray. | |
Print Position | X Offset | Move the print start position (at the upper left corner of pages) horizontally from -500 (left) to +500 (right) dots in 300 dpi. | |
Y Offset | Move the print start position (at the upper left corner of pages) vertically from -500 (up) to +500 (down) dots in 300 dpi. | ||
Check Paper | - | Select whether to display a message telling you to check that the size and type of the paper in the machine and the machine's Paper Size and Paper Type settings match. | |
Beep | - | - | Adjust the beeper volume. |
LCD Settings | Backlight | - | Adjust the brightness of the LCD backlight. |
Dim Timer | - | Set how long the LCD backlight stays on after returning to the Home screen. | |
Screen Settings | Home Screen | - | Set the Main Home screen. |
Scan Screen | - | Set the default Scan screen settings. | |
Display Information | IP Address | Select whether or not to display your machine's IP Address on the Home screens. | |
Ecology | Eco Mode | - | |
Toner Save | - | Increase the page yield of the toner cartridge. | |
Sleep Time | - | Set the number of minutes before the machine enters Sleep mode. | |
Quiet Mode | - | Decrease printing noise. | |
Auto Power Off | - | Set the number of hours that the machine will remain in Deep Sleep mode before going into Power Off mode. Choose Off if you do not want the machine to go into Power Off mode. | |
[Shortcut Settings]
Level 3 | Level 4 | Descriptions |
---|---|---|
(Select shortcut button.) | Rename | Change the shortcut name. |
Edit | Change the shortcut settings. | |
Delete | Delete the shortcut. | |
Register Card/NFC | Assign a shortcut to an ID card. | |
Delete Card/NFC | Remove a shortcut from an ID card. |
[Printer]
Level 3 | Level 4 | Level 5 | Descriptions |
---|---|---|---|
Emulation | - | - | Select the emulation mode. |
Resolution | - | - | Select a print resolution. |
Density | - | - | Increase or decrease the print density. |
Print Settings | - | - | Set your print settings to Text or Graphics. |
Print Options | Font List | HP LaserJet | Print a list of the machine’s internal fonts. |
BR-Script 3 | |||
Test Print | - | Print a test page. | |
2-sided | 2-sided Print | - | Enable or disable 2-sided printing and choose long edge or short edge. |
Single Image | - | For a print job where the last page is a 1-sided image, select the 1-sided Feed option to reduce printing time. | |
Auto Continue | - | - | Select this setting if you want the machine to clear paper size errors, and to use the paper in the tray. |
Paper Type | - | - | Set the paper type. |
Paper Size | - | - | Set the paper size. |
Copies | - | - | Set the number of printed pages. |
Orientation | - | - | Set pages to print in either portrait or landscape orientation. |
Print Position | - | - | Access the Print Position setting menus. |
Auto FF | - | - | Allow the machine to print any remaining data automatically. |
HP LaserJet | Font No. | Font No. | Set the font number. |
Soft Font No. | Set the soft font number. This menu appears if a soft font is installed on your Brother machine. | ||
Font Pitch | - | Set the font pitch. (Available only for certain fonts.) | |
Font Point | - | Set the font size. (Available only for certain fonts.) | |
Symbol Set | - | Select the symbol or character set. | |
Table Print | - | Print the code table. | |
Auto LF | - | ON: CR -> CR+LF, OFF: CR -> CR | |
Auto CR | - | ON: LF -> LF+CR, FF -> FF+CR, or VT -> VT+CR OFF: LF -> LF, FF -> FF, or VT -> VT | |
Auto WRAP | - | Select whether you want a line feed and carriage return when the carriage position reaches the right margin. | |
Auto SKIP | - | Select whether you want a line feed and carriage return when the carriage position reaches the bottom margin. | |
Left Margin | - | Set the left margin at column 0 to 70 columns at 1 cpi. | |
Right Margin | - | Set the right margin at column 10 to 80 columns at 1 cpi. | |
Top Margin | - | Set the top margin distance from the top edge of the paper. | |
Bottom Margin | - | Set the bottom margin distance from the bottom edge of the paper. | |
Lines | - | Set the number of lines on each page. | |
Tray Command | - | Select this setting if a tray mismatch appears when you use the HP drivers. | |
BR-Script 3 | Error Print | - | Choose whether the machine prints the error information when errors occur. |
Multiple Page | - | Set the page layout when printing multiple pages. | |
PDF Print Options | - | Set the PDF Print setting to print either comments (Markup) or stamps in the PDF file, along with the text. | |
PDF Fit to Page | - | Select if the machine scales or resizes the pages in the PDF file to fit the selected paper size. | |
Reset Printer | - | - | Restore the machine settings to the factory settings. |
[Network]
Level 3 | Level 4 | Level 5 | Level 6 | Descriptions |
---|---|---|---|---|
Wired LAN | TCP/IP | Boot Method | - | Select the Boot method that best suits your needs. |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. (up to 32 characters) | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the IP address of the primary DNS server. | ||
Secondary | Specify the IP address of the secondary DNS server. | |||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
Ethernet | - | - | Select the Ethernet link mode. | |
Wired Status | - | - | View the current wired status. | |
MAC Address | - | - | View the machine's MAC address. | |
Set to Default | - | - | Restore the wired network settings to the factory settings. | |
Wired Enable | - | - | Turn the Wired LAN interface on or off manually. | |
WLAN(Wi-Fi) | Find Wi-Fi Network | - | - | Configure your wireless network settings manually. |
TCP/IP | Boot Method | - | Select the Boot method that best suits your needs. | |
IP Address | - | Enter the IP address. | ||
Subnet Mask | - | Enter the Subnet mask. | ||
Gateway | - | Enter the Gateway address. | ||
Node Name | - | Enter the Node name. (up to 32 characters) | ||
WINS Configuration | - | Select the WINS configuration mode. | ||
WINS Server | Primary | Specify the IP address of the primary WINS server. | ||
Secondary | Specify the IP address of the secondary WINS server. | |||
DNS Server | Primary | Specify the IP address of the primary DNS server. | ||
Secondary | Specify the IP address of the secondary DNS server. | |||
APIPA | - | Set the machine to allocate the IP address from the link-local address range automatically. | ||
IPv6 | - | Turn the IPv6 protocol on or off. | ||
WPS/Push Button | - | - | Configure your wireless network settings using the one-button push method. | |
WPS/PIN Code | - | - | Configure your wireless network settings using WPS with a PIN. | |
Recover WLAN | - | - | Reset and restart your wireless network. | |
WLAN Status | Status | - | View the current wireless network status. | |
Signal | - | View the current wireless network signal strength. | ||
SSID | - | View the current SSID. | ||
Comm. Mode | - | View the current Communication mode. | ||
MAC Address | - | - | View the machine's MAC address. | |
Set to Default | - | - | Restore the wireless network settings to the factory settings. | |
WLAN Enable | - | - | Turn the WLAN on or off manually. | |
Wi-Fi Direct | Manual | - | - | Configure your Wi-Fi Direct network settings manually. |
Group Owner | - | - | Set your machine as the Group Owner. | |
Push Button | - | - | Configure your Wi-Fi Direct network settings using the one-button push method. | |
PIN Code | - | - | Configure your Wi-Fi Direct network settings using WPS with a PIN code. | |
Device Information | Device Name | - | View your machine's device name. | |
SSID | - | View the Group Owner's SSID. When the machine is not connected, the LCD displays Not Connected. | ||
IP Address | - | View your machine's current IP Address. | ||
Status Information | Status | - | View the current Wi-Fi Direct network status. | |
Signal | - | View the current Wi-Fi Direct network signal strength. When your machine acts as Group Owner, the LCD always indicates a strong signal. | ||
I/F Enable | - | - | Turn the Wi-Fi Direct connection on or off. | |
NFC | - | - | - | Turn the NFC function on or off. |
Web Based Mgmt | - | - | - | Enable or disable Web Based Management. If you enable this function, make sure you specify the connection method to use Web Based Management. |
Global Detect | Allow Detect | - | - | Enable or disable Global Detect, a function that detects and notifies the user when the user unintentionally connects to a global network. |
Reject Access | - | - | Disable connections to the global network. | |
Network Reset | - | - | - | Restore all network settings back to the factory settings. |
[Print Reports]
Level 3 | Descriptions |
---|---|
User Settings | Print a list of your User settings. |
Printer Settings | Print a list of your Printer settings. |
Network Configuration | Print a list of your Network settings. |
Print File List | Print a list of data saved in the machine's memory. |
Drum Dot Print | Print the Drum Dot Check Sheet. |
WLAN Report | Print the wireless LAN connection results. |
[Machine Info.]
Level 3 | Level 4 | Descriptions |
---|---|---|
Serial No. | - | Check your machine's serial number. |
Firmware Version | Main Version | Check your machine's firmware version. |
Sub1 Version | ||
Security Version | ||
Firmware Update | - | Update your machine to the latest firmware. |
Firmware Auto Check | - | View firmware information on the Home screen. |
Page Counter | Total | Check the total number of pages the machine has printed. |
Copy | ||
Other | ||
Parts Life | Drum | Check the percentage of the supplies' life that remains available. |
[Initial Setup]
Level 3 | Level 4 | Descriptions |
---|---|---|
Reset | Machine Reset | Restore all the machine settings that you have changed. |
Network Reset | Restore all network settings back to the factory settings. | |
All Settings | Restore all the machine's settings back to the factory settings. | |
Factory Reset | Restore all settings back to the factory settings. | |
Local Language | - | Change your LCD language. |