Home > Routine Maintenance > Check Your Brother Machine > Check the Print Quality
Check the Print Quality
If faded or streaked colors and text appear or if text is missing on your printouts, the print head nozzles may be clogged. Print the Print Quality Check Sheet and look at the nozzle check pattern.
MFC-J805DW/MFC-J815DW
- Press Settings.
- Press
or
to make your selections:
- Select [General Setup]. Press OK.
- Select [Maintenance]. Press OK.
- Select [Impr. PrintQuality]. Press OK.
- Select [Impr. PrintQuality] again. Press OK.
- Press
.
The machine prints the Print Quality Check Sheet. - Check the quality of the four color blocks on the sheet.
- When an LCD message prompts you to check the print quality, do one of the following:
- If all lines are clear and visible, press
to select [No].
The Print Quality check finishes.
- If lines are missing (see Poor, below), press
to select [Yes].
OK
NG
- When the LCD message prompts you to check the print quality of each color, press
or
to select the pattern (1–4) that most closely matches the printing result. Press OK.
- Do one of the following:
- If print head cleaning is needed, press
to start the cleaning procedure.
- If print head cleaning is not needed, the Maintenance screen reappears on the LCD.
- After the cleaning procedure is finished, the LCD message prompts you to check the print quality again.
Press
[Yes] to start the print quality check.
- Press
again.
The machine prints the Print Quality Check Sheet again. Check the quality of the four color blocks on the sheet again.
If you clean the print head and the print has not improved, try installing a new Genuine Brother Brand replacement ink cartridge for each problem color. Try cleaning the print head again. If the print has not improved, contact Brother Customer Service.
- IMPORTANT
- DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
![image](../images/topic1_icon5.png)
When a print head nozzle is clogged, the printed sample looks like this:
![image](../img/GUID-68E1960A-096D-41B3-978F-1461213CE6EB-low.gif)
After the print head nozzle is cleaned, the horizontal lines are gone:
![image](../img/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
MFC-J995DW
- Press
.
- Press [Start].The machine prints the Print Quality Check Sheet.
- Check the quality of the four color blocks on the sheet.
- When an LCD message prompts you to check the print quality, do one of the following:
- If all lines are clear and visible, press [No], and then press
to finish the Print Quality check.
- If lines are missing (see Poor, as follows), press [Yes].
OK
NG
- When the LCD message prompts you to check the print quality of each color, press the number of the pattern (1–4) that most closely matches the printing result.
- Do one of the following:
If print head cleaning is needed, press [Start] to start the cleaning procedure.
- If print head cleaning is not needed, the Maintenance screen reappears on the touchscreen. Press
.
- After the cleaning procedure is finished, the LCD message prompts you to print the Print Quality Check Sheet again. Press [Yes], and then press [Start].The machine prints the Print Quality Check Sheet again. Check the quality of the four color blocks on the sheet again.
If you clean the print head and the print has not improved, try installing a new Genuine Brother Brand replacement ink cartridge for each problem color. Try cleaning the print head again. If the print has not improved, contact Brother Customer Service.
- IMPORTANT
- DO NOT touch the print head. Touching the print head may cause permanent damage and may void the print head's warranty.
![image](../images/topic1_icon5.png)
When a print head nozzle is clogged, the printed sample looks like this:
![image](../img/GUID-68E1960A-096D-41B3-978F-1461213CE6EB-low.gif)
After the print head nozzle is cleaned, the lines are gone:
![image](../img/GUID-1FC4A64D-6E6C-413D-9AC1-EC743D563369-low.gif)
Was this page helpful?