Copy on Both Sides of the Paper (2-sided Copy)
- You must choose a 2-sided copy layout from the following options before you can start 2-sided copying.
- The layout of your original document determines which 2-sided copy layout you should choose.
- To use the automatic 2-sided copy feature, you must load your document in the ADF.
- When you manually make 2 sided copies from a 2-sided document, use the scanner glass.
- Select A4 sized paper when using the 2‑sided copy option.
- Portrait
- 2–sided to 2–sided
- 1–sided to 2–sided (Long Edge Flip)
- 1–sided to 2–sided (Short Edge Flip)
- Landscape
- 2–sided to 2–sided
- 1–sided to 2–sided (Long Edge Flip)
- 1–sided to 2–sided (Short Edge Flip)
DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
- Load your document.
- Do one of the following:
For MFC models
Press
(COPY).
Use the dial pad to enter the number of copies you want.
For DCP models
Press
or
to enter the number of copies you want.
- Do one of the following:
Press 2-sided.
Press Options or Copy/Scan Options.
Press
or
to select [2-sided], and then press OK.
- Press
or
to display [Layout Long] or [Layout Short], and then press OK.
- Select flip on long edge or flip on short edge, and then press OK.
- Press
or
to display [2sided → 2sided] or [1sided → 2sided], and then press OK.
- NOTE
-
For DCP-L2531DW/DCP-L2535DW/DCP-L2550DW/MFC-L2710DW/MFC-L2713DW/MFC-L2715DW/MFC-L2716DW
If you select [2sided → 2sided], you cannot use the ADF. Use the scanner glass.
- Press Start.If you placed the document in the ADF, the machine scans the pages and starts printing.If you are using the scanner glass, go to the next step.
- Repeat the following steps for each page of the layout:
- For MFC models
After the machine scans the page, place the next page on the scanner glass, and then press
to scan the page.
- For DCP models
After the machine scans the page, place the next page on the scanner glass, and then press
to select the [Yes] option.
- Press
to select the [No] option.
HL-L2395DW/MFC-L2730DW/MFC-L2750DW/MFC-L2751DW/MFC-L2770DW/MFC-L2771DW
- Load your document.
- Press
([Copy]).
- Enter the number of copies.
- Press [Options].
- Press
or
to display the [2-sided Copy] option, and then press [2-sided Copy].
- Press
or
to display the layout options, and then press the option you want.
- NOTE
-
For HL-L2395DW/MFC-L2730DW
If you select [2-sided -> 2-sided], you cannot use the ADF. Use the scanner glass.
- When finished, press [OK].
- Press [Start]. If you placed the document in the ADF, the machine scans the pages and starts printing.If you are using the scanner glass, go to the next step.
- After the machine scans the page, place the next page on the scanner glass, and then press [Yes] to scan the next page.
- After scanning all the pages, press [No] to finish.